Gratis levering fra 599 kr., cykler fra 3.995 kr.6
40.000 produkter 600 mærker
En dansk tekst om denne vare er desværre ikke tilgængelig på dette tidspunkt.
X-12 rear axle standard. Super stiff and super lightweight. The challenge faced with through-axles is that the axle must be clamped axially as well as radially in the dropouts in order to achieve a high rigidity. But clamping axially and radially so far, also meant having to tighten several screws. We solve this problem by using a taper which allows play-free clamping in both axial and radial directions even though the axle is only tightened axially.
A further big problem with conventional through-axles is the missing stop and a guide for the rear axle which would enable a much simpler positioning of the rear wheel with respect to the dropouts. To guarantee a really simple mounting of the rear wheel dropouts with axle guides are required or else the rear axle has no defined positioning.
The difference compared to conventional through-axle dropouts/through-axles - less weight - clearly user friendlier, quicker fitting and removal of rear wheel - for the first time a toe and camber adjustment of the rear wheel is possible. For this, the thread insert in the right dropout is replaced by an eccentrical thread insert which can then be adjusted to the desired position
The difference to conventional dropouts and quick releases - higher rigidity - less weight - simpler, or at least comparably simple fitting and removal of rear wheel - user friendlier design and less prone to misalignment - even after multiple fitting and removing of rear wheel the same brake rotor positioning is maintained
The required hubs Standard 135 mm and 150 mm hubs are used and have the standard end caps replaced with wider ones (3.5 mm per side), actual resulting width is 142 mm and 157 mm.
Compatibility Syntace X-12 axle with 135+ (142 mm) is used with Liteville 101, 301 and 901 frames. For the Liteville 101 4X frame the 150+ (157 mm) version is needed. The new Boost standard is also available, as well as 197mm for fatbikes.
X-12 / 150+ = suitable for Liteville 101 4x
Rear axle for X-12 systems
X-12 thru axle without insert
Greb: uden Aksel: Aluminium
Bagpå: 157 mm
bag: 150 mm
Bagpå: 41 g
Giv din mening til kende. Vær den første til at anmelde dette produkt