Kan du ikke se det sikre browservindue fra PayPal?

Klik her
for at åbne det.

Din bestilling er lige straks gennemført. Vi takker for din tålmodighed.

End of Season Sale - Over 1.000 cykler | Spar op til 40%

SRAM Force22 Gearhåndtag med Douple Tap gear-/bremsegreb foran/venstre

ID: 542779
2.729 kr.
1.779 kr.
- 34%
Inkl. moms, Gratis levering
Flyt til ønskeliste
  • 100 dages Gratis retur
  • Gratis levering fra 599 kr.,
    cykler fra 3.995 kr.6
  • 40.000 produkter 500 mærker

En dansk tekst om denne vare er desværre ikke tilgængelig på dette tidspunkt.

The SRAM Force shift levers have got a brand new design inside and outside. The revised ergonomics provide a better finger grip and the new gear lever for more space for the fingers. The grip width can be adjusted individually. The fully sealed system protects against contamination.

Connectamajig makes it child's play to install the hydraulic hose when installing the seat post. No more fear of hydraulics: One press and a twist. It's simple. With Connectamajig, the hose can be disconnected and reconnected several times before venting is necessary.

DOT 5.1
Heat is the enemy of any braking system. Better heat management also helps you ride safer. We found out that it takes three times longer for DOT 5.1 than for DOT 4 to reach boiling point. This ensures smooth and consistent braking power under even more extreme conditions

With DoubleTap, you can shift more easily and quickly because the cumbersome and unnatural movement required by two-lever systems is a thing of the past. DoubleTap switches up and down in a short, light movement. Minimum effort and maximum comfort, no matter where your hands are on the handlebars. DoubleTap uses two pawls: one to hold the ratchet wheel and one to move it up and down during gear changes. The gearshift pawls are arranged so that they can jump over each other depending on how far and how much pressure you press the gearshift lever. The transport pawl (04) moves the pawl wheel (02) upwards through the switching range by briefly and quickly touching it. For a lower gear, the lever is moved by a longer distance (in the same direction as when shifting up, but by the ergonomically maximum possible angle of 15º). The retaining pawl (03) and the transport pawl jump over quickly and cleanly.

Grip width adjustment
The fit and ergonomics of the brake lever is a very personal matter. All riders have individual position preferences as well as unique hand sizes and finger lengths. The handle width adjustment makes it easy to adjust the lever - for maximum control with just one finger.

Yaw technology enables trim-free shifting because the front derailleur cage describes an arc and is thus at a constant angle to the chain. The shifts are more direct and precise, providing unprecedented performance when shifting up front.

ZeroLoss simply means, well, zero loss. When you push on the lever, for an upshift or down shift, the cable is engaged instantly, with zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.


  • Carbon brake lever and aluminium gear lever
  • lower force required
  • easy access for venting
  • Weight including hydraulic rim brakes
Tilsigtet brug
Levering: Venstre arm
Kompatibel venstre: 2-speed
Kompatibel højre: ---
405  g
Inkl.: Bremsegreb:, gearkabel
Giv din mening til kende. Vær den første til at anmelde dette produkt

Brug for hjælp?
Kontakt vores kundeservice: man-fre 10.00-17.00
78 77 40 68
Registrer dig nu og få en rabatkupon på 70 kr.
Eksklusive kampagner og tilbud venter dig. 4

Databeskyttelse & afmeldelse
Everyday we get more people on bikes