Kan du ikke se det sikre browservindue fra PayPal?

Klik her
for at åbne det.

Din bestilling er lige straks gennemført. Vi takker for din tålmodighed.

CUBE SOMMERUDSALG | OP TIL 20% RABAT
Det ønskede produkt er desværre udsolgt. Hvis du ønsker at få besked, når produktet igen er på lager, kan du oplyse os din e-mailadresse.
Mavic

Mavic Ksyrium Pro Exalith Rear Wheel Shimano 25, black (2019)

ID: 549806
4.719 kr.
3.909 kr.
- 17%
Inkl. moms, Gratis levering
Ikke på lager
Jeg vil gerne have besked, når produktet igen er på lager.

Flyt til ønskeliste
  • 100 dages Gratis retur
  • Gratis levering fra 599 kr.,
    cykler fra 3.995 kr.6
  • 40.000 produkter 500 mærker
Produktbeskrivelse

En dansk tekst om denne vare er desværre ikke tilgængelig på dette tidspunkt.

Mavic's newly designed Ksyrium Pro Exalith rear wheel consisting of the new FTS-L freewheel body and narrow rim.

The wheelset system impresses with the optimal mixture of Exalith and Maxtal as well as an unbeatable price/performance ratio. The composition of Mavic's Ksyrium Pro Exalith rims with a 26 mm high rim profile and a width of 25 mm designed for wire/folding tyres form the basis for low inertia. In addition, the specially tuned Mavic Yksion tyre is an ideal complement and makes the Ksyrium Pro Exalith the top wheel for competition. The Ksyrium Pro Exalith rim consistsof Exalith 2 oated rim flanks and a lightweight Maxtal aluminium rim, allowing up to 18 percent shorter braking distances in both wet and dry conditions. Due to the special material properties, the Ksyrium Pro Exalith rim has less wear and a longer service life. The aluminium brake surface has a rougher surface than standard aluminium rims and according to Mavic this coating is designed for 20000 km. Use Mavic's special brake pads to get the maximum performance of the Exalith coating. The Ksyrium Pro Exalith rear wheel also impresses with its Zicral Aero spokes. There are 20 on the rear wheel. Mavic's intelligent tyre system with the new Mavic Yksion tyre not only enhances aerodynamics, but also gives you high riding comfort with good puncture resistance thanks to 127 TPI thread density. Fine tuning for the Cosmic Pro Carbon Exalith wheel by using a harder rubber compound on the rear wheel (Yksion PowerLink) for less rolling resistance and durability. 

Exalith 2
Best braking performance
The exclusive Mavic Exalith 2 technology for aluminium rims has been further refined to ensure extra durability and the best possible braking performance in all (weather) conditions.The braking distance is 18% shorter in wet conditions, with unchanged brake pad wear. The Exalith treatment penetrates the aluminium, reduces wear and tear and ensures that the anthracite-grey appearance is retained over thousands of kilometres. New black Mavic Exalith 2 brake pads provide quiet, strong braking performance and durability (included with wheels). ISM 4D
Inter Spoke Milling 4 Dimension. ISM 4D4 reduces weight and inertia without sacrificing longevity. This results in faster acceleration, better handling and greater stability - the perfect mix for a better riding experience. In addition, the exclusive Mavic patent in its ingenious rim profile provides even better aerodynamics. Up to 50g lighter for even faster climbing performance. Minimum inertia for maximum acceleration. Extra aerodynamic rim profile for reduced drag.

PowerLink
A good rear tyre, whether clincher or tubular, must provide optimum power transmission and maximum speed. That’s why PowerLink tyres are optimally designed for use on the rear wheel and impress with their minimal rolling resistance. Superior power transmission, reduced rolling resistance and secure cornering grip, Dual Compound rubber compound, improved rolling characteristics - lightweight, smooth and extra dense carcass.Even longer life with reduced risk of punctures: Dual compound rubber compound plus strong nylon protection layer.

FTS-L 
The decisive freewheel components are specifically reinforced: at the contact surface between pawl and hub body with two stainless steel inserts - so the hub body can be made of 100% aluminium.Higher efficiency thanks to better power transmission. Lightweight, rugged hub design.

Fore
Rigid and stable
Instead of a conventional rim bore, the inner rim base is pressed inwards in a single operation and provided with a thread into which the spoke nipples are screwed directly. The outer rim base remains intact. The rim is 4 times more resistant to fatigue. The rim is 20% stiffer - for optimum power transmission.

Isopulse
Optimum power transmission
This special spoking (radial right, crossed twice on the left) increases the stability of the wheels and ensures optimum power transmission - thanks to more even spoke tension on the left and right hub flank.Higher stiffness under heavy load - for direct power transmission. Higher stability - for less maintenance.

QRM+
Mavic's most sophisticated bearing technology with double seal and extremely dimensionally stable, micro-fine adjustable. Extremely dimensionally stable for maximum efficiency. Quickly adjustable - depending on your requirements - super smooth for maixmalen smooth running or slightly tighter for worse weather conditions. ZicralSpecial aluminium alloy that produces spokes with a better stiffness-to-weight ratio and is even more tensile.Lighter spokes for better climbing characteristics. Stiffer spokes for better power transmission. More stable spokes for greater durability.

Maxtal
The Mavic exclusive aluminium alloy offers a higher strength/weight ratio than conventional 6106 aluminium.30% more stable rims with simultaneously lower rim weight. 

SUP
Soudé Usiné Process. The rim joint is welded and then milled over to achieve an even braking surface. Extremely stable rim impact, prevents any jerking of the brakes.Facilitates the spoking and centering of a perfect wheel.

Detaljer

  • Mavic Yksion-dæk: 210g
  • Wheel with 20 Zicral aero-profile spokes
  • Fore rim bores for higher lateral rigidity
  • anbefalet dækbredde 25-32 mm
  • QMR+ hubs with cartridge bearing and aluminium axle
  • Baghjulsnav med Quick Release
  • frihjulsenhed til Shimano- eller Sram-kassetter (kompatibel med 8-11 speed)
  • optionally convertible to Campagnolo freewheel body
  • Øvre ryttervægt grænse med udstyr og cykel 120 kg!
  • ASTM kategori 2: til veje og terræn med niveauforskelle på op til 15 cm
Specifikationer
Tilsigtet brug
Racercykel  
Version
Baghjul  
Akselsystem
Baghjul 10x130  mm
Akselstandard
Quickrelease  
Fælge
Materiale: Aluminium
Design: Hollow chamber
Profilhøjde: lav (< 30mm)
Højde: 26 mm (rear wheel, asymmetrical)
dæktype: Trådkantsdæk/Clincher
Bremsesystem: Fælgbremse
Ventilboring: 6,5 mm mm
Bredde: 19 mm
indvendig bredde: 17 mm
Størrelse (i tommer): 28 tommer
ETRTO (Bredde x Diameter): 622x15 mm
Bagnav
Materiale: Akselmateriale: Aluminium, krop: Aluminium
Installation bredde: 130 mm
Akse diameter: 9 mm
Tandhjuls type: stikkassette
Antal gear: 11
Antal eger: 20
Egenskaber: til Quick-Release
Eger
Materiale: Zicral
Design: bladede eger
Lacing: Isopulse (HR)
Dæk
Dækstørrelse ETRTO (bredde x diameter):: 25-622 (700x25c)
Tryk Bar: 8-10 Bar
Tryk psi: 115-145
Gummiblanding: Single Compound
Tæthed af karkassenvæv: 127
Forhjul
konstrueret til Bremsetype: ---  
Baghjul
konstrueret til Bremsetype: Fælgbremse
Vægt: 845 g
Leveringsomfang
Mavic Ksyrium Pro Exalith rear wheel, Mavic Yksion PowerLink rear tyres, 1 pair brake pads for Exalith brake flanks, multifunction adjustment key, quick release BR601, manual  
Køn
Unisex
Modelår
2019
Varenummer
549806
Bedømmelse
Giv din mening til kende. Vær den første til at anmelde dette produkt

Brug for hjælp?
Kontakt vores kundeservice: man-fre 10.00-17.00
78 77 40 68
Nyhedsbrev
Registrer dig nu og få en rabatkupon på 70 kr.
Eksklusive kampagner og tilbud venter dig. 4

Databeskyttelse & afmeldelse
Everyday we get more people on bikes