Kan du ikke se det sikre browservindue fra PayPal?

Klik her
for at åbne det.

Din bestilling er lige straks gennemført. Vi takker for din tålmodighed.

Lagersalg! - Vi gør plads til efterårets nyheder | Spar op til 70%
DT Swiss

DT Swiss H 1950 Classic Baghjul Center Lock 142/12mm TA Shimano 29", black (2020)

ID: 820229
1.629 kr.
1.449 kr.
- 11%
Inkl. moms, Gratis levering
Flyt til ønskeliste
  • 100 dages Gratis retur
  • Gratis levering fra 599 kr.,
    cykler fra 3.995 kr.6
  • 40.000 produkter 600 mærker
Produktbeskrivelse

En dansk tekst om denne vare er desværre ikke tilgængelig på dette tidspunkt.

A mountain bike has to be fun for both climbing and downhill. The H 1950 SPLINE Classic is the perfect wheel for both purposes. Since eMTBs allow the driver to pack many mountains into one ride, reliability is critical. Weight is also a concern, because mountain biking should be fun. The H 1950 SPLINE Classic meets both requirements. Thanks to their unsurpassed wheel-building know-how and industry-leading test procedures, DT Swiss are able to spec their wheels in such a way that they are precisely matched to the intended field of application. And this is exactly what the developers at DT Swiss have done with this wheel. All you have to do it ride.

HYBRID Hubs
Hybrid hubs have oversized housings with increased wall thickness, are equipped with heavy duty axles and have extra reinforced spoke holders. In addition, they are equipped with new 24T ratchets made of hardened steel as well as oversized bearings and steel rotors. Thanks to these clever features, DT Swiss achieves a permissible maximum system weight of 150 kg with only minimal weight gain compared to a standard MTB hub. The result is a jewel of a hub that can handle the highest torques, offers direct propulsion and, combined with the other HYBRID components, results in extremely robust wheels.

24T Ratchets
Hardened 24T steel ratchets ensure ultimate durability, have a small pressure angle and thus guarantee a crisp ride feel.

OVERSIZED BEARINGS
All ball bearings in the hubs are oversized to withstand the high loads and run perfectly under the toughest conditions.

STEEL ROTORS
To cope with the high torques generated by modern eMTB drives, all hybrid freewheel bodies are made of steel. Available in both Shimano and SRAM XD versions, they are an extremely durable mounting point for any cassette.

HYBRID spokes
To complete the hybrid system, DT Swiss needed spokes that could not only withstand the higher weight and torque of a modern eMTB, but also fitted perfectly to the oversized spoke holders of the hubs. The specially designed spokes have reinforced and oversized Straight Pull spoke heads which, together with the DT Pro Lock Squorx nipples, ensure that all the power you transfer to the hubs is translated into forward movement. Disregarded by many, specifically developed by DT Swiss: hybrid spokes, which are made for this new way of cycling.

HYBRID rims
Lots of climbing and descending on an eMTB can be very tough on the rims. The DT Swiss Hybrid rims feature load-optimised cross-sections and are approved for a system weight of 150 kg. In order to create a super stable, eMTB specific rim, the developers have increased the strength and material thickness where it makes sense. Available in various widths, you are sure to find the right model for your riding style and terrain. Made for the harder, faster and more ambitious biking of the future. Hybrid wheels from DT Swiss have higher wall thicknesses and are approved for a system weight of 150 kg.

DT pro lock technology
The screw locking system injected into the nipples enables the construction of extremely durable impellers. DT pro lock nipples prevent the spoke-nipple connection from loosening automatically. The integrated, patented screw locking system in the nipple thread is based on a two-component adhesive. As soon as the nipples are screwed in, an adhesive is activated which cures completely at room temperature after approx. 6 - 7 hours. If necessary, the wheel can be used immediately after assembly. Multiple re-centering is possible without any problems. However, the adhesive strength decreases slightly with each re-centering.

TUBELESS Technology
Tubeless tyres offer some key advantages over the conventional combination of tyre and inner tube.

No special tools
No special tools are required for normal maintenance

Specifikationer
Detaljer
Baseret på Spline 350 med 24T Ratchet friløbs-stålkrop til Shimano
Tilsigtet brug
MTB  
Designet til elcykler
ja  
Version
Baghjul  
Akselsystem
Baghjul 12x142  mm
Akselstandard
Stikakse  
Fælge
Materiale: Aluminium
Design: Dobbelt hollow kammer
Profilhøjde: lav (< 30mm)
dæktype: Trådkantsdæk/Clincher
Bremsesystem: Skivebremse
Ventilboring: 6,5 mm mm
Tubeless-egnet: ja
Bredde: 30 mm
indvendig bredde: 25 mm
Størrelse (i tommer): 29 tommer
ETRTO (Bredde x Diameter): 622 x 25 mm
Egenskaber: med bremseslidindikator
Bagnav
Installation bredde: 142 mm
Akse diameter: 12 mm
Tandhjuls type: Shimano/ SRAM cassette
Antal gear: 11
Egenskaber: lukket, Til stikakse, kuglelejer
Eger
Design: HYBRID-specific J-bend spokes with DT Pro Lock Squorx nipples
Lacing: 3-speed krydset
Forhjul
konstrueret til Bremsetype: ---  
Baghjul
konstrueret til Bremsetype: Center Lock-skivebremser
Vægt: 1166 g
Hjulsæt
Maks. totalbelastning: 150  kg
Leveringsomfang
1 DT Swiss H 1950 Spline Classic rear wheel 29" hybrid 30 mm incl. tubeless rim tape 27 mm, tubeless valve 32 mm, IS 6-bolt adapter, 5 mm QR-Kit  
Køn
Unisex
Modelår
2020
Varenummer
820229
Bedømmelse
Giv din mening til kende. Vær den første til at anmelde dette produkt

Brug for hjælp?
Kontakt vores kundeservice: man-fre 10.00-17.00
78 77 40 68
Nyhedsbrev
Registrer dig nu og få en rabatkupon på 70 kr.
Eksklusive kampagner og tilbud venter dig. 4

Databeskyttelse & afmeldelse
Everyday we get more people on bikes